All Most Common Problems With Haier TV (Solved)

Haier TVs are known for their endurance and high quality but like any other appliance, they are also vulnerable to normal wear and tear. In this article, I will cover the most common problems with Haier TV and how can you resolve them on your own.

Most of the Haier TV problems can be fixed by changing the power outlet, changing the power circuit, replacing TV cables, updating TV software, or simply power cycling your TV. However, in some cases, you may need to call a professional technician or Haier service center for assistance and repair. Now, let’s uncover the most common issues with Haier TV and their solutions.

Haier TV Won’t Turn On

If your Haier TV doesn’t turn on, it may result from a faulty remote control, power outlet, or circuit breaker.

As a first step, you should check if your TV remote is working fine. You can also try changing the batteries of your TV remote to make sure that there is no fault in it.

Secondly, you should check if your TV is getting the required power from the wall socket. You can try plugging your TV into another power source and see if it turns on.

If your TV remote and wall socket are not faulty, you may also check if the circuit breaker in your home is not faulty. If your circuit breaker fails, you will not be able to use other electronic appliances connected to that circuit.

You may also check the TV cables for any damage and replace them if needed. If the problem persists, you can try power cycling your TV. 

How to Power Cycle Haier TV?

• Turn off your TV and unplug it from the wall socket.
•  Then, wait for at least 1-2 minutes.
• After that, plug it in again and turn it on to see if your TV starts working.

In many cases, simply power cycling your TV fixes all the temporary glitches and the TV starts working.

Haier TV Keeps Turning Off

If your TV turns off automatically, it can be very annoying, especially when you are enjoying your favorite show or movie. As a first step, you should check if the sleep timer is enabled. If the sleep timer is on, turn it off.

Moreover, if you are using a satellite box, make sure that it is turned on as well. If the Sat box is not turned on or TV input is not set on that box, your TV will not work properly.

Outdated software can also cause Haier TV problems due to any software bug. So, you may also try resetting your TV and updating the TV software (if it needs an update). 

Haier TV Black Screen

If your Haier TV screen goes black, you should make sure that your TV is connected to the power source. If it is connected and you still cannot see anything except black color on your screen, there might be a main board or a backlight failure. 

How can I check if there is a backlight failure?

• Turn on your TV and the flashlight on your mobile phone.
• Bring your flashlight close to the TV screen and change the channels.
• If there is an issue with your TV’s backlight, you will be able to see the faint images.

If you are unable to see anything, there might be a problem with the main control board. 

In both cases, you should contact a professional repairman or Haier support center to get your TV repaired.

Haier TV Black Screen With Sound

Many users also reported that their Haier TV has sound but no picture. If your Haier TV has sound and dull picture or no picture at all, it indicates that the backlight of your TV is not working anymore. 

You can further confirm it by using the simple method as discussed in the previous heading. After confirming that, you should take your TV to the authorized service center to get your TV backlight replaced.

Haier TV Not Turning On But Red light is On

If your TV is not turning on but the red light remains on, there might be a loose or disconnected cable. Firstly, check if the signal cable is disconnected or is loosely connected. 

You may need to reset your TV if the cable is properly connected. If the problem persists even after a reset, you may need to contact a professional technician to replace the main control board or IR sensor.

How to Reset Haier TV?

• Turn off your TV, and unplug from the wall socket.
• Press the TV’s power button and hold it for 1 minute.
• After 1 minute, plug your TV into the wall socket again and turn it on.

If the simple reset doesn’t work, you can try the factory reset option. However, the factory reset will remove all saved settings, accounts, and installed apps from your Haier TV.

How to Factory Reset Haier TV?

Factory Reset With Menu Button

• Press the Menu button on your TV.
• In the menu, choose Settings and then select Device Preferences.
• You can use the Chanel button for moving up and down and the Volume button for selecting.
• After that, choose Factory Data reset and then the Erase Everything option.
• On the next screen, choose Yes and your TV will be reset to factory settings.

Factory Reset With Recovery Mode

The Haier Roku TV has a reset pinhole button on the backside. You can use that button to perform a factory reset in the following way:

• Insert a ballpen or a pin in the reset pinhole button. Press and hold the Reset button for 30 seconds.

• After that, your Haier Roku TV will be restarted and you will see the Recovery Mode on the screen.
• Now, you can follow the instructions on your screen to restore your TV to default settings.

Additionally, you can also use the Roku app to restore the factory settings of your Roku Haier TV.

Haier TV Troubleshooting Manual

Haier TV Problems	Causes	Solutions
The TV not turning on	Faulty power outlet, faulty cables, faulty circuit breaker, dead TV remote batteries.	Change the power outlet, replace cables, change the circuit breaker, replace TV remote batteries, power cycle the TV.
TV keeps turning off	Sleep timer enabled, Sat box not turned on, outdated TV software.	Disable the Sleep timer, Turn on and set the satellite box, update the TV software.
Black screen	Main board failure, backlight failure.	Replace the main board or backlight.
Haier TV has sound and dark or faint picture	Backlight failure	Replace the backlight.
The TV not turning on but the red light is on	Disconnected or loose signal cable, IR sensor failure, main board failure.	Connect cables properly, reset the TV, reset factory settings, contact a professional technician.
Haier TV keypad not working	Child lock enabled, Faulty Keypad	Disable child lock, Contact the Service center for repair.
Unclear picture and sound	Weak signals	Check the signal wire, Contact Haier support.
Lines on the TV screen	Weak signals, loose or damaged LVDS wire.	Check the signal wire, Contact Haier support.
Haier TV power button not working	Faulty cables, faulty power outlet, defective power button.	Replace the cables, change the power outlet, contact Haier support or a qualified technician to repair the power button.

Pros and Cons of Haier TV

Pros

• High-quality.
• Budget-friendly.
• Wide range of products (Smart TV, Digital TV, FHD Smart TV, Android TV, etc).
• User-friendly.
• Innovative features.

Cons

• Average sound quality.
• Average picture quality.
• Using it carelessly can result in a shortened lifespan.

Also Read: 10 Most Common Problems with JVC Fire TV (Solved)

Frequently Asked Questions